Wide range binary and ternary thin film combinatorial libraries mixing Al, Cu, and Ga were screened for identifying alloys with enhanced ability to withstand electromigration. Bidimensional test wires were obtained by lithographically patterning the substrates before simultaneous vacuum co-deposition from independent sources. Current-voltage measurement automation allowed for high throughput experimentation, revealing the maximum current density and voltage at the electrical failure threshold for each alloy. The grain boundary dynamic during electromigration is attributed to the resultant between the force corresponding to the electron flux density and the one corresponding to the atomic concentration gradient perpendicular to the current flow direction. The screening identifies Al-8 at. % Ga and Cu-5 at. % Ga for replacing pure Al or Cu connecting lines in high current/power electronics. Both alloys were deposited on polyethylene naphthalate (PEN) flexible substrates. The film adhesion to PEN is enhanced by alloying Al or Cu with Ga. Electrical testing demonstrated that Al-8 at. % Ga is more suitable for conducting lines in flexible electronics, showing an almost 50% increase in electromigration suppression when compared to pure Al. Moreover, Cu-5 at. % Ga showed superior properties as compared to pure Cu on both SiO2 and PEN substrates, where more than 100% increase in maximum current density was identified.The COVID-19 pandemic has clearly shown the importance of developments in fabrication of advanced protective equipment. This study investigates the potential of using multifunctional electrospun poly(methyl methacrylate) (PMMA) nanofibers decorated with ZnO nanorods and Ag nanoparticles (PMMA/ZnO-Ag NFs) in protective mats. Herein, the PMMA/ZnO-Ag NFs with an average diameter of 450 nm were simply prepared on a nonwoven fabric by directly electrospinning from solutions containing PMMA, ZnO nanorods, and Ag nanoparticles. The novel material showed high performance with four functionalities (i) antibacterial agent for killing of Gram-negative and Gram-positive bacteria, (ii) antiviral agent for inhibition of corona and influenza viruses, (iii) photocatalyst for degradation of organic pollutants, enabling a self-cleaning protective mat, and (iv) reusable surface-enhanced Raman scattering substrate for quantitative analysis of trace pollutants on the nanofiber. This multi-functional material has high potential for use in protective clothing applications by providing passive and active protection pathways together with sensing capabilities.Excessive cadmium (Cd) accumulation in rice grain is a global issue that affects human health. The drainage of paddy soils during the grain filling period leads to the remobilization of Cd in soils, resulting in most of the Cd accumulated in rice grain. The rate of Cd remobilization during drainage differs markedly among soils, but the mechanisms underlying these differences remain largely unknown. Using microcosm soil incubation, electrochemical experiments, isotope labeling, and microscopic and spectroscopic analyses, here, we discover the voltaic effect as a novel mechanism controlling the remobilization of Cd during soil drainage. During soil flooding, microbial sulfate reduction results in the formation of various metal sulfides. When the soils are subsequently drained, the various metal sulfides can form within sulfide voltaic cells. The metal sulfides with a lower electrochemical potential act as anodes and are prone to oxidative dissolution, whereas the metal sulfides with a higher potential act as cathodes and are protected from oxidation. This voltaic effect explains why the presence of ZnS (with a low potential) suppresses the oxidative dissolution of Cd sulfides, whereas the presence of CuS (with a high potential) promotes the oxidative dissolution of Cd sulfides. The voltaic effect is applicable to all chalcophile trace metals coupled with the sulfur redox cycle in periodically anoxic-oxic environments, thus playing an important role in the biogeochemistry of trace metals.The formation of amyloid β (1-42) (Aβ42) oligomers is considered to be a critical step in the development of Alzheimer's disease (AD). However, the mechanism underlying this process at physiologically low concentrations of Aβ42 remains unclear. We have previously shown that oligomers assemble at such low Aβ42 monomer concentrations in vitro on phospholipid membranes. We hypothesized that membrane composition is the factor controlling the aggregation process. Accumulation of cholesterol in membranes is associated with AD development, suggesting that insertion of cholesterol into membranes may initiate the Aβ42 aggregation, regardless of a low monomer concentration. We used atomic force microscopy (AFM) to test the hypothesis and directly visualize the aggregation process of Aβ42 on the surface of a lipid bilayer depending on the cholesterol presence. Time-lapse AFM imaging unambiguously demonstrates that cholesterol in the lipid bilayer significantly enhances the aggregation process of Aβ42 at nanomolar monomer concentration. Quantitative analysis of the AFM data shows that both the number of Aβ42 oligomers and their sizes grow when cholesterol is present. Importantly, the aggregation process is dynamic, so the aggregates assembled on the membrane can dissociate from the bilayer surface into the bulk solution. Computational modeling demonstrated that the lipid bilayer containing cholesterol had an elevated affinity to Aβ42. Moreover, monomers adopted the aggregation-prone conformations present in amyloid fibrils. Selleckchem Rigosertib The results lead to the model for the on-surface aggregation process in which the self-assembly of Aβ oligomers is controlled by the lipid composition of cellular membranes.DNA nanotechnology produces precision nanostructures of defined chemistry. Expanding their use in biomedicine requires designed biomolecular interaction and function. Of topical interest are DNA nanostructures that function as vaccines with potential advantages over nonstructured nucleic acids in terms of serum stability and selective interaction with human immune cells. Here, we describe how compact DNA nanobarrels bind with a 400-fold selectivity via membrane anchors to white blood immune cells over erythrocytes, without affecting cell viability. The selectivity is based on the preference of the cholesterol lipid anchor for the more fluid immune cell membranes compared to the lower membrane fluidity of erythrocytes. Compacting DNA into the nanostructures gives rise to increased serum stability. The DNA barrels furthermore functionally modulate white blood cells by suppressing the immune response to pro-inflammatory endotoxin lipopolysaccharide. This is likely due to electrostatic or steric blocking of toll-like receptors on white blood cells.