About seller
We describe the synthesis of optical modes whose axial structure follows a random tandem array of Bessel beams of integer order. The array follows fluctuations of Markov-chain type and the amplitude values for each beam are linked to a sequence of random vectors. As a prototype, we describe the synthesis of optical fields for Markov-chain type Ehrenfest. This process models the thermodynamic equilibrium and then it can be related to the evolution and stability of optical systems, in this way, it offers a similitude with partially coherent processes where the coherence degree is now distributed between all the compounds of the resulting random vector. The matrix representation for the stochastic process allows incorporating entropy properties and the calculus of the purity for the optical field. This constitutes the basis to describe the interference between markovian modes. When the set of markovian modes type Ehrenfest reaches a stable configuration they become indistinguishability non-conservative optical field having associated hysteresis features. Computer simulations are presented.Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-film lithium niobate. In this paper, we show that the dielectric cladding on a lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive effect in lithium niobate ring resonators can be effectively mitigated. Our work presents a reliable approach to control the photorefractive effect on thin-film lithium niobate and will further advance the performance of integrated classical and quantum photonic devices based on thin-film lithium niobate.With ultrashort pulse durations and ultrahigh peak intensities, ultrafast lasers can create different types of micro/nano-structures to functionalize the processed surface with new properties. However, the applications of this method on freeform surfaces are still limited by the short length of a laser focusing spot and complex control of the 3D moving trajectory in the fabrication process. In this paper, we overcome this problem by shaping the on-axis intensity along the propagation axis using the spatial light modulator. By designing the phase mask, we increased the length of the stable-intensity zone (intensity fluctuation less then 10%) by more than 3 times compared to that of an unshaped Bessel beam. The energy deposition was also optimized to be less than 2% fluctuation based on simulations. Using this method, we fabricated micro/nano structures on 3D surfaces at different fluences and demonstrated various properties including colorization, anti-reflection, and hydrophobicity in large height range. We demonstrated the applications of the proposed method in creating hydrophobicity on complex freeform syringe tip surfaces. This improved the minimum manipulatable volume of a liquid droplet to 2 times smaller compared with untreated syringe, thus greatly extending its performance for micro-droplet manipulation. This method offers an alternative approach for reliable and affordable freeform curved-surface processing.In this paper, we experimentally demonstrate a secure 100 Gb/s 214-level intensity modulation and direct detection transmission over a 50 km standard single-mode fiber (SSMF) using a quantum noise stream cipher (QNSC) technique and 8-bit digital to analog converters. Optical coarse-to-fine modulation (CTFM) has been proposed to simultaneously enhance the security and overcome the weakness of low modulation depth in the traditional CTFM scheme. The optical power instead of the radio-frequency signal power is adjusted to satisfy the required peak-to-peak relation for CTFM, and thus the coarse and fine modulation has the same modulation depth. Two optical CTFM schemes based on an optical coupler and a polarizing beam combiner (PBC) are proposed and their pros and cons are analyzed and compared. Considering the trade-off of transmission performance and security performance, the optical CTFM scheme based on PBC is preferred in our experiment. 214-level pulse amplitude modulation (PAM) is achieved using two dual-drive Mach-Zehnder modulators (DD-MZM). Simultaneously, each DD-MZM is also used to achieve single-sideband (SSB) modulation to eliminate the power fading induced by fiber dispersion. By these means, 100 Gb/s 214-level PAM-QNSC signal transmission over 50 km SSMF with the bit error rate below the 7% overhead hard-decision forward error correction threshold of 3.8×10-3 is achieved. The results validate that the proposed scheme is effective to realize low-cost, high-speed, and highly secure optical transmission in the data center.A metal electrode modification process for AlGaN-based metal-semiconductor-metal (MSM) photodetectors have been introduced to enhance the response of solar-blind ultraviolet (UV) light detection. The hexadecanethiol organic molecules are chemically adsorbed on the electrodes of high-Al-content Al0.6Ga0.4N MSM solar-blind UV photodetectors, which can reduce the work function of the metal electrode and change the height of the Schottky barrier. This modification process significantly increases the photocurrent and responsivity of the device compared with the referential photodetector without modification. Additionally, the adverse effects caused by the surface state and polarization of the AlGaN materials are effectively reduced, which can be beneficial for improving the electrical performances of III-nitride-based UV photodetectors.Extreme ultraviolet (EUV) lithography plays a vital role in the advanced technology nodes of integrated circuits manufacturing. Source mask optimization (SMO) is a critical resolution enhancement technique (RET) or EUV lithography. In this paper, an SMO method for EUV lithography based on the thick mask model and social learning particle swarm optimization (SL-PSO) algorithm is proposed to improve the imaging quality. The thick mask model's parameters are pre-calculated and stored, then SL-PSO is utilized to optimize the source and mask. Rigorous electromagnetic simulation is then carried out to validate the optimization results. Besides, an initialization parameter of the mask optimization (MO) stage is tuned to increase the optimization efficiency and the optimized mask's manufacturability. Optimization is carried out with three target patterns. selleck products Results show that the pattern errors (PE) between the print image and target pattern are reduced by 94.7%, 76.9%, 80.6%, respectively.